Coal Ridge Scenario
Moderator: Locomotion Moderators
Coal Ridge Scenario
Hello Locomotion Community,
I created this scenario about a month ago to test the Serpent Stations, found here : viewtopic.php?f=30&t=86337
I tried to place the industries in groups such that you can capture all of them with one large curved station.
- -
This uses the built-in map "Race to Read" with different industries and of course a different goal. Basically the valley is full of Iron ore and Coal, and your job is to haul it all up the mountain to the one lone Steel Works to produce Steel. This then needs to come back down the hill to produce goods. Sounds easy, well it's not! Early in the game, I had three large articulated steam locos distributed in one 20 car consist, and it still struggled up the grade! You need power, speed, and an organized railroad to stay profitable and haul high volumes of goods. I am glad you can run a train that looks 'normal' in the length here, not shortened like usual for Locomotion. Yes, I know about the Long Station Patch, but that is not necessary for this one. You start with early steam, and progress thru modern diesel. It wasn't until high horsepower diesels became common that I approached the goal here. Share your technique to get it done quicker!
Here is the scenario, one with all the mods I used, one that *should* be stripped of all mods. Let me know if you can't open it.
I created this scenario about a month ago to test the Serpent Stations, found here : viewtopic.php?f=30&t=86337
I tried to place the industries in groups such that you can capture all of them with one large curved station.
- -
This uses the built-in map "Race to Read" with different industries and of course a different goal. Basically the valley is full of Iron ore and Coal, and your job is to haul it all up the mountain to the one lone Steel Works to produce Steel. This then needs to come back down the hill to produce goods. Sounds easy, well it's not! Early in the game, I had three large articulated steam locos distributed in one 20 car consist, and it still struggled up the grade! You need power, speed, and an organized railroad to stay profitable and haul high volumes of goods. I am glad you can run a train that looks 'normal' in the length here, not shortened like usual for Locomotion. Yes, I know about the Long Station Patch, but that is not necessary for this one. You start with early steam, and progress thru modern diesel. It wasn't until high horsepower diesels became common that I approached the goal here. Share your technique to get it done quicker!
Here is the scenario, one with all the mods I used, one that *should* be stripped of all mods. Let me know if you can't open it.
- Attachments
-
- Coal Ridge.SC5
- Updated File.
- (852.23 KiB) Downloaded 355 times
-
- Coal Ridge - ModFree.SC5
- (855.36 KiB) Downloaded 403 times
Last edited by glenjimen on 06 Jan 2020 03:18, edited 1 time in total.
Visit the Directory --> Loco-Dat-Directory
-
- Engineer
- Posts: 1
- Joined: 28 Jun 2011 14:03
Re: Coal Ridge Scenario
Hello!
I had a few missing DATs for the modded version of the map. I found some of them after some digging but these are the rest of them I can't find anywhere. Any help is appreciated!
--- Sounds ---
SNDK4W1 : --- Not installed!!! ---
SNDK4W2 : --- Not installed!!! ---
--- Vehicles ---
GFLATCAR : --- Not installed!!! ---
GHOPCAR2 : --- Not installed!!! ---
T2SPCF01 : --- Not installed!!! ---
TRAM3WGN : --- Not installed!!! ---
TRAM4WGN : --- Not installed!!! ---
USHBGUC : --- Not installed!!! ---
XBC50CP : --- Not installed!!! ---
XGN34 : --- Not installed!!! ---
XGNGOND : --- Not installed!!! ---
XGP20SP : --- Not installed!!! ---
XGP9ATSF : --- Not installed!!! ---
XRS2SF : --- Not installed!!! ---
XRS2SLUG : --- Not installed!!! ---
XSF40BC : --- Not installed!!! ---
XSPSBC : --- Not installed!!! ---
XU30ATSF : --- Not installed!!! ---
--- Industries ---
COALDOPP : --- Not installed!!! ---
OREDOPPL : --- Not installed!!! ---
STEEWORK : --- Not installed!!! ---
WARENLAG : --- Not installed!!! ---
I had a few missing DATs for the modded version of the map. I found some of them after some digging but these are the rest of them I can't find anywhere. Any help is appreciated!
--- Sounds ---
SNDK4W1 : --- Not installed!!! ---
SNDK4W2 : --- Not installed!!! ---
--- Vehicles ---
GFLATCAR : --- Not installed!!! ---
GHOPCAR2 : --- Not installed!!! ---
T2SPCF01 : --- Not installed!!! ---
TRAM3WGN : --- Not installed!!! ---
TRAM4WGN : --- Not installed!!! ---
USHBGUC : --- Not installed!!! ---
XBC50CP : --- Not installed!!! ---
XGN34 : --- Not installed!!! ---
XGNGOND : --- Not installed!!! ---
XGP20SP : --- Not installed!!! ---
XGP9ATSF : --- Not installed!!! ---
XRS2SF : --- Not installed!!! ---
XRS2SLUG : --- Not installed!!! ---
XSF40BC : --- Not installed!!! ---
XSPSBC : --- Not installed!!! ---
XU30ATSF : --- Not installed!!! ---
--- Industries ---
COALDOPP : --- Not installed!!! ---
OREDOPPL : --- Not installed!!! ---
STEEWORK : --- Not installed!!! ---
WARENLAG : --- Not installed!!! ---
- Owen-Alexander
- Engineer
- Posts: 79
- Joined: 19 Jun 2008 11:30
- Location: Australia
Re: Coal Ridge Scenario
Just wanted to chime to say that the mod free version is showing missing mods aswell.
--- Sounds ---
SNDK4W1 : --- Not installed!!! ---
SNDK4W2 : --- Not installed!!! ---
--- Bridges ---
INVISIBL : --- Not installed!!! ---
--- Industries ---
COALDOPP : --- Not installed!!! ---
OREDOPPL : --- Not installed!!! ---
STEEWORK : --- Not installed!!! ---
The bridge is from Glenjimen, The all terrain earth slope. The sound files seem like they are from a K4 Pacific, but not the ones in the US set, and lastly, no clue on the coal, ore and steel dopplers.
@Trainzmaster4: I can help with your search, the dats starting with X (i.e. XGN34) are from the old US stock pack by jose. I don't have a link handy, but hopefully puts you in the right direction. The USBGUC is the Umbrella Corp. Bethgon (a Plastikman mod).
Sadly, That is the extent of my knowledge on old mods.
--- Sounds ---
SNDK4W1 : --- Not installed!!! ---
SNDK4W2 : --- Not installed!!! ---
--- Bridges ---
INVISIBL : --- Not installed!!! ---
--- Industries ---
COALDOPP : --- Not installed!!! ---
OREDOPPL : --- Not installed!!! ---
STEEWORK : --- Not installed!!! ---
The bridge is from Glenjimen, The all terrain earth slope. The sound files seem like they are from a K4 Pacific, but not the ones in the US set, and lastly, no clue on the coal, ore and steel dopplers.
@Trainzmaster4: I can help with your search, the dats starting with X (i.e. XGN34) are from the old US stock pack by jose. I don't have a link handy, but hopefully puts you in the right direction. The USBGUC is the Umbrella Corp. Bethgon (a Plastikman mod).
Sadly, That is the extent of my knowledge on old mods.
- Walter1940
- Tycoon
- Posts: 990
- Joined: 19 Mar 2007 01:30
- Location: Munich, Germany
- Contact:
Re: Coal Ridge Scenario
COALDOPP : --- http://www.wisim-welt.de/filebase/index ... ledoppler/
OREDOPPL : --- http://www.wisim-welt.de/filebase/index ... rzdoppler/
STEEWORK : --- http://www.wisim-welt.de/filebase/index ... tahlwerke/
WARENLAG : --- http://www.wisim-welt.de/filebase/index ... arenlager/
The rest is unknown to me.
OREDOPPL : --- http://www.wisim-welt.de/filebase/index ... rzdoppler/
STEEWORK : --- http://www.wisim-welt.de/filebase/index ... tahlwerke/
WARENLAG : --- http://www.wisim-welt.de/filebase/index ... arenlager/
The rest is unknown to me.
http://www.walter1940.de
Vehicles for Locomotion
Tutorials in english
- From MSTS to Locomotion ---> http://www.walter1940.de/tutorial/msts2loco/
- Wally ---> http://www.walter1940.de/tutorial/wally/
- xml-modding ---> http://www.walter1940.de/tutorial/xml-modding/
Vehicles for Locomotion
Tutorials in english
- From MSTS to Locomotion ---> http://www.walter1940.de/tutorial/msts2loco/
- Wally ---> http://www.walter1940.de/tutorial/wally/
- xml-modding ---> http://www.walter1940.de/tutorial/xml-modding/
Re: Coal Ridge Scenario
Thanks for catching my mistakes, guys!
I've updated the modded version of the scenario such that it does not include T2SPCF01. That is a locomotive I got from user Tattoo privately, I'm not allowed to upload it. Sorry. The sound files : SNDK4W1 & 2 are for this loco as well. If the sound files are still in the scenario, then I can't remove them. The best way around that is to make blank / muted sound files, and name them appropriately so you can open the scenario. Many scenarios before this one have similar problems.
GFLATCAR and GHOPCAR2 are my original creations, uploaded here.
The rest are hosted on https://www.locomotiondepot.net/amitrains/
Thanks to Owen-Alexander and Walter1940 for helping find some mods.
I hope that helps!
I've updated the modded version of the scenario such that it does not include T2SPCF01. That is a locomotive I got from user Tattoo privately, I'm not allowed to upload it. Sorry. The sound files : SNDK4W1 & 2 are for this loco as well. If the sound files are still in the scenario, then I can't remove them. The best way around that is to make blank / muted sound files, and name them appropriately so you can open the scenario. Many scenarios before this one have similar problems.
GFLATCAR and GHOPCAR2 are my original creations, uploaded here.
The rest are hosted on https://www.locomotiondepot.net/amitrains/
Thanks to Owen-Alexander and Walter1940 for helping find some mods.
I hope that helps!
- Attachments
-
- GFLATCAR.dat
- (753.57 KiB) Downloaded 340 times
-
- GHOPCAR2.dat
- (679.86 KiB) Downloaded 297 times
Visit the Directory --> Loco-Dat-Directory
- Owen-Alexander
- Engineer
- Posts: 79
- Joined: 19 Jun 2008 11:30
- Location: Australia
Re: Coal Ridge Scenario
Would copying other sound files and renaming work as well? Or is there something internal that the game looks for.
I do have a rather obtuse way of 'fixing' the mod free version. I have an un-modded version I could use to recreate the mod free map. That way it wouldn't have the sound files or the added bridges and industries.
@glenji: How much of Race to Read was changed? Was is just industries or was there some terraforming done.
I do have a rather obtuse way of 'fixing' the mod free version. I have an un-modded version I could use to recreate the mod free map. That way it wouldn't have the sound files or the added bridges and industries.
@glenji: How much of Race to Read was changed? Was is just industries or was there some terraforming done.
- Walter1940
- Tycoon
- Posts: 990
- Joined: 19 Mar 2007 01:30
- Location: Munich, Germany
- Contact:
Re: Coal Ridge Scenario
Yes, the internal name is read. But if you disassemble the sound with Locotool and change it internally and then change the file name identically, then it certainly works.Owen-Alexander wrote: ↑06 Jan 2020 04:47 Would copying other sound files and renaming work as well? Or is there something internal that the game looks for.
http://www.walter1940.de
Vehicles for Locomotion
Tutorials in english
- From MSTS to Locomotion ---> http://www.walter1940.de/tutorial/msts2loco/
- Wally ---> http://www.walter1940.de/tutorial/wally/
- xml-modding ---> http://www.walter1940.de/tutorial/xml-modding/
Vehicles for Locomotion
Tutorials in english
- From MSTS to Locomotion ---> http://www.walter1940.de/tutorial/msts2loco/
- Wally ---> http://www.walter1940.de/tutorial/wally/
- xml-modding ---> http://www.walter1940.de/tutorial/xml-modding/
Re: Coal Ridge Scenario
@Owen-Alexander : I only changed the industries and towns in the Race to Read Scenario. You can recreate a version of it if you prefer. The main purpose of this scenario is to give me and others a chance to test the "Serpent Station" idea. See the link in the first post.
I too have done this. It's about the easiest thing you can do with LocoTool.Walter1940 wrote: ↑06 Jan 2020 10:43 Yes, the internal name is read. But if you disassemble the sound with Locotool and change it internally and then change the file name identically, then it certainly works.
Visit the Directory --> Loco-Dat-Directory
- Owen-Alexander
- Engineer
- Posts: 79
- Joined: 19 Jun 2008 11:30
- Location: Australia
Re: Coal Ridge Scenario
@glenji: Oh, I had thought there was minor terraforming, Good to know its close to the default map. I mainly offered to try and recreate what you had done to help out those who may not be at confident as we are at modifying things.glenjimen wrote: ↑07 Jan 2020 03:22 @Owen-Alexander : I only changed the industries and towns in the Race to Read Scenario. You can recreate a version of it if you prefer. The main purpose of this scenario is to give me and others a chance to test the "Serpent Station" idea. See the link in the first post.
I too have done this. It's about the easiest thing you can do with LocoTool.Walter1940 wrote: ↑06 Jan 2020 10:43 Yes, the internal name is read. But if you disassemble the sound with Locotool and change it internally and then change the file name identically, then it certainly works.
It never occurred to me change sound dats before. Mainly used to changing the vehicles.
- Lighthouse
- Transport Coordinator
- Posts: 317
- Joined: 29 Jul 2009 17:51
- Location: ´s-Hertogenbosch (AKA "The Duke´s Forest") , the Netherlands
Re: Coal Ridge Scenario
i missed the following files, can someone help me?
--- Sounds ---
SNDK4W1 : --- Not installed!!! ---
SNDK4W2 : --- Not installed!!! ---
--- Vehicles ---
TRAM1wgn : --- Not installed!!! ---
TRAM3WGN : --- Not installed!!! ---
TRAM4WGN : --- Not installed!!! ---
USCHTG01 : --- Not installed!!! ---
USGP759 : --- Not installed!!! ---
USOHOJN1 : --- Not installed!!! ---
USOHOJO1 : --- Not installed!!! ---
USSEMI59 : --- Not installed!!! ---
USSEMO59 : --- Not installed!!! ---
USSW1259 : --- Not installed!!! ---
the sounds i have to edit them and tramwgn files are not in my tram files?
thx.
--- Sounds ---
SNDK4W1 : --- Not installed!!! ---
SNDK4W2 : --- Not installed!!! ---
--- Vehicles ---
TRAM1wgn : --- Not installed!!! ---
TRAM3WGN : --- Not installed!!! ---
TRAM4WGN : --- Not installed!!! ---
USCHTG01 : --- Not installed!!! ---
USGP759 : --- Not installed!!! ---
USOHOJN1 : --- Not installed!!! ---
USOHOJO1 : --- Not installed!!! ---
USSEMI59 : --- Not installed!!! ---
USSEMO59 : --- Not installed!!! ---
USSW1259 : --- Not installed!!! ---
the sounds i have to edit them and tramwgn files are not in my tram files?
thx.
The only thing that is not very successful in the wireless version : Bungee Jumping
Just fold at the dotted line and cut it out with a pair of scissors. If you are under the age of 16 please ask one of your parents or an adult supervisor if she/he can help you.
........................................................................................
Just fold at the dotted line and cut it out with a pair of scissors. If you are under the age of 16 please ask one of your parents or an adult supervisor if she/he can help you.
........................................................................................
- Lighthouse
- Transport Coordinator
- Posts: 317
- Joined: 29 Jul 2009 17:51
- Location: ´s-Hertogenbosch (AKA "The Duke´s Forest") , the Netherlands
Re: Coal Ridge Scenario
I have found some files in the mean time but these four not.Lighthouse wrote: ↑23 Mar 2020 15:29 i missed the following files, can someone help me?
--- Sounds ---
SNDK4W1 : --- Not installed!!! ---
SNDK4W2 : --- Not installed!!! ---
--- Vehicles ---
TRAM3WGN : --- Not installed!!! ---
TRAM4WGN : --- Not installed!!! ---
The sound files are suppose to be from a k4 loco?
The tram files should be the wagons for the tram3&tram4 models, coronation tram and a ce2/2 ?
After a few hours strolling through the web and downloading dozens of file packs i’m stuck, can one put me in right direction?
The only thing that is not very successful in the wireless version : Bungee Jumping
Just fold at the dotted line and cut it out with a pair of scissors. If you are under the age of 16 please ask one of your parents or an adult supervisor if she/he can help you.
........................................................................................
Just fold at the dotted line and cut it out with a pair of scissors. If you are under the age of 16 please ask one of your parents or an adult supervisor if she/he can help you.
........................................................................................
Re: Coal Ridge Scenario
I helped Lighthouse with the missing files via Private Message.
Here are blank sound files for SNDK4W1 & SNDK4W2. There is no sound, but Locomotion will stop complaining about missing files.
Here are blank sound files for SNDK4W1 & SNDK4W2. There is no sound, but Locomotion will stop complaining about missing files.
- Attachments
-
- SNDK4W1.dat
- Blank sound : SNDK4W1
- (85 Bytes) Downloaded 285 times
-
- SNDK4W2.dat
- Blank sound : SNDK4W2
- (85 Bytes) Downloaded 285 times
Visit the Directory --> Loco-Dat-Directory
- Lighthouse
- Transport Coordinator
- Posts: 317
- Joined: 29 Jul 2009 17:51
- Location: ´s-Hertogenbosch (AKA "The Duke´s Forest") , the Netherlands
Re: Coal Ridge Scenario
Thx Glen
The only thing that is not very successful in the wireless version : Bungee Jumping
Just fold at the dotted line and cut it out with a pair of scissors. If you are under the age of 16 please ask one of your parents or an adult supervisor if she/he can help you.
........................................................................................
Just fold at the dotted line and cut it out with a pair of scissors. If you are under the age of 16 please ask one of your parents or an adult supervisor if she/he can help you.
........................................................................................
- Lighthouse
- Transport Coordinator
- Posts: 317
- Joined: 29 Jul 2009 17:51
- Location: ´s-Hertogenbosch (AKA "The Duke´s Forest") , the Netherlands
Re: Coal Ridge Scenario
It took me 145 years but i managed it in the end.
My Save file and screenshots:
See text by screenshots from what it is.
My Save file and screenshots:
See text by screenshots from what it is.
- Attachments
-
- Screenshot2.png
- 99 % done
- (319.49 KiB) Not downloaded yet
-
- Screenshot3.png
- 100 % done
- (333.85 KiB) Not downloaded yet
-
- Coal Ridge 15.SV5
- save file from 100%
- (1.99 MiB) Downloaded 272 times
The only thing that is not very successful in the wireless version : Bungee Jumping
Just fold at the dotted line and cut it out with a pair of scissors. If you are under the age of 16 please ask one of your parents or an adult supervisor if she/he can help you.
........................................................................................
Just fold at the dotted line and cut it out with a pair of scissors. If you are under the age of 16 please ask one of your parents or an adult supervisor if she/he can help you.
........................................................................................
- Lighthouse
- Transport Coordinator
- Posts: 317
- Joined: 29 Jul 2009 17:51
- Location: ´s-Hertogenbosch (AKA "The Duke´s Forest") , the Netherlands
Re: Coal Ridge Scenario
part 2
- Attachments
-
- Screenshot4.png
- Loading Coal @ the Castle ruins
- (294.3 KiB) Not downloaded yet
-
- Screenshot5.png
- Iron Ore loading a bit further along the line
- (250.76 KiB) Not downloaded yet
-
- Screenshot6.png
- Coal loading another bit further along the line.
- (299.13 KiB) Not downloaded yet
The only thing that is not very successful in the wireless version : Bungee Jumping
Just fold at the dotted line and cut it out with a pair of scissors. If you are under the age of 16 please ask one of your parents or an adult supervisor if she/he can help you.
........................................................................................
Just fold at the dotted line and cut it out with a pair of scissors. If you are under the age of 16 please ask one of your parents or an adult supervisor if she/he can help you.
........................................................................................
- Lighthouse
- Transport Coordinator
- Posts: 317
- Joined: 29 Jul 2009 17:51
- Location: ´s-Hertogenbosch (AKA "The Duke´s Forest") , the Netherlands
Re: Coal Ridge Scenario
Uphill you find the steel plant which has many versions in the years, i ended with this one.
- Attachments
-
- Screenshot1.png
- Steel plant and waiting area for steel-trains.
- (215.83 KiB) Not downloaded yet
-
- Screenshot7.png
- Second view from steel plant .
- (201.71 KiB) Not downloaded yet
The only thing that is not very successful in the wireless version : Bungee Jumping
Just fold at the dotted line and cut it out with a pair of scissors. If you are under the age of 16 please ask one of your parents or an adult supervisor if she/he can help you.
........................................................................................
Just fold at the dotted line and cut it out with a pair of scissors. If you are under the age of 16 please ask one of your parents or an adult supervisor if she/he can help you.
........................................................................................
- Lighthouse
- Transport Coordinator
- Posts: 317
- Joined: 29 Jul 2009 17:51
- Location: ´s-Hertogenbosch (AKA "The Duke´s Forest") , the Netherlands
Re: Coal Ridge Scenario
The steel goes downhill to goods factory and the goods to the city.
- Attachments
-
- Screenshot13.png
- Goods factory and passenger station combined.
- (336.1 KiB) Not downloaded yet
-
- Screenshot15.png
- Station in city and the only industry/coalmines i did not use in this scenario.
- (271.57 KiB) Not downloaded yet
The only thing that is not very successful in the wireless version : Bungee Jumping
Just fold at the dotted line and cut it out with a pair of scissors. If you are under the age of 16 please ask one of your parents or an adult supervisor if she/he can help you.
........................................................................................
Just fold at the dotted line and cut it out with a pair of scissors. If you are under the age of 16 please ask one of your parents or an adult supervisor if she/he can help you.
........................................................................................
- Lighthouse
- Transport Coordinator
- Posts: 317
- Joined: 29 Jul 2009 17:51
- Location: ´s-Hertogenbosch (AKA "The Duke´s Forest") , the Netherlands
Re: Coal Ridge Scenario
After several years and more money i expanded the iron ore lines to the ore Doppler.
- Attachments
-
- Screenshot12.png
- Iron ore loading to the Doppler
- (346.58 KiB) Not downloaded yet
-
- Screenshot14.png
- Un/Loading @ the Doppler.
- (222.02 KiB) Not downloaded yet
The only thing that is not very successful in the wireless version : Bungee Jumping
Just fold at the dotted line and cut it out with a pair of scissors. If you are under the age of 16 please ask one of your parents or an adult supervisor if she/he can help you.
........................................................................................
Just fold at the dotted line and cut it out with a pair of scissors. If you are under the age of 16 please ask one of your parents or an adult supervisor if she/he can help you.
........................................................................................
- Lighthouse
- Transport Coordinator
- Posts: 317
- Joined: 29 Jul 2009 17:51
- Location: ´s-Hertogenbosch (AKA "The Duke´s Forest") , the Netherlands
Re: Coal Ridge Scenario
Then a second line from the towns to the mountains, loading coal and iron ore.
And another feeder for the ore Doppler.
And another feeder for the ore Doppler.
- Attachments
-
- Screenshot8.png
- Cola loading from the other line.
- (290.19 KiB) Not downloaded yet
-
- Screenshot9.png
- Iron Ore Loading from the other line.
- (378.16 KiB) Not downloaded yet
-
- Screenshot11.png
- Extra Iron Ore to the Doppler.
- (187.72 KiB) Not downloaded yet
The only thing that is not very successful in the wireless version : Bungee Jumping
Just fold at the dotted line and cut it out with a pair of scissors. If you are under the age of 16 please ask one of your parents or an adult supervisor if she/he can help you.
........................................................................................
Just fold at the dotted line and cut it out with a pair of scissors. If you are under the age of 16 please ask one of your parents or an adult supervisor if she/he can help you.
........................................................................................
- Lighthouse
- Transport Coordinator
- Posts: 317
- Joined: 29 Jul 2009 17:51
- Location: ´s-Hertogenbosch (AKA "The Duke´s Forest") , the Netherlands
Re: Coal Ridge Scenario
The second Goods factory i bought extra along the second line up into the mountains.
With three local lines into the neighbouring cities.
With three local lines into the neighbouring cities.
- Attachments
-
- Screenshot10.png
- Second goods factory.
- (242.99 KiB) Not downloaded yet
The only thing that is not very successful in the wireless version : Bungee Jumping
Just fold at the dotted line and cut it out with a pair of scissors. If you are under the age of 16 please ask one of your parents or an adult supervisor if she/he can help you.
........................................................................................
Just fold at the dotted line and cut it out with a pair of scissors. If you are under the age of 16 please ask one of your parents or an adult supervisor if she/he can help you.
........................................................................................
Who is online
Users browsing this forum: No registered users and 0 guests