Tracks & Trains
-
- Engineer
- Posts: 9
- Joined: 13 Oct 2012 13:08
Re: Tracks & Trains
Will there be an all purpose track that diesel, 3rd rail and panto graph locomotives can all use?
Also, will track extras be placed as a separate path (TTD) or placed on pre-built track (LoMo)?
Also, will track extras be placed as a separate path (TTD) or placed on pre-built track (LoMo)?
Re: Tracks & Trains
there will be no special "all purpose track". but the tracks are compatible. thus just use a diesel engine. it can use all tracks. (if you use electric engines you need pantograph or for special engines like underground you need 3rd rail)minecraftfan wrote:Will there be an all purpose track that diesel, 3rd rail and panto graph locomotives can all use?
Also, will track extras be placed as a separate path (TTD) or placed on pre-built track (LoMo)?[/quote]
placed on (better: close to) pre-built tracks
www.p1sim.org - P1SIM - Traffic, Logistics, City-Building & more
Join the discussions here on tt-forums.net!
Join the discussions here on tt-forums.net!
Re: Tracks & Trains
I think diagonal tracks look always a bit ugly in dimetric perspective and can look better in topdown view.smallfly wrote: I installed locomotion to test it. I think it looks quite ugly since the gaps between the tracks are different.
I took a look at catrain.org today, which looks a bit like openttd in topdown view . It has a quite intuitiv and relativ comfortable but slow way to build diagonal tracks.
I played it only for a short time, but there are a lot of things I like. For example, you can change between automatic and construction modus, and the "game" automatically stops. The system works quite good if you like to play on smaller maps, which could be connected to a larger, fictiv world map, but it's different to games like locomotion or openttd with complete automation on larger maps.
- Attachments
-
- catrain.png (12.8 KiB) Viewed 24553 times
Re: Tracks & Trains
Hey, I was wondering about how the module editor would work with tracks. Besides being able to construct custom turns, what will you be able to do?
Can you build switches, road crossings or stations in different configurations?
Also will there be any way to break blocked sections of track into separate blocks in compact situations such as this : (see attached picture)
There are 5 blocks in this example, but real railroads separate the middle block (#5) to allow both trains on the mainline to pass in opposite directions. This wouldn't be path-dependent-routing, just placing a signal in a tight location.
Can you build switches, road crossings or stations in different configurations?
Also will there be any way to break blocked sections of track into separate blocks in compact situations such as this : (see attached picture)
There are 5 blocks in this example, but real railroads separate the middle block (#5) to allow both trains on the mainline to pass in opposite directions. This wouldn't be path-dependent-routing, just placing a signal in a tight location.
- Attachments
-
- P1SIM_signalBlocks_2.jpg (41.03 KiB) Viewed 23338 times
Visit the Directory --> Loco-Dat-Directory
Re: Tracks & Trains
You can easily build switches and road crossings with the module editor (see picture). The way how stations work is not decided yet. But stations wont be modules. Stations are more like a region. Inside this region trains can load/unload cargo.glenjimen wrote:Can you build switches, road crossings or stations in different configurations?
Each logistics node with more than two outgoing or incoming path starts a new block. Automatically.glenjimen wrote:Also will there be any way to break blocked sections of track into separate blocks in compact situations
www.p1sim.org - P1SIM - Traffic, Logistics, City-Building & more
Join the discussions here on tt-forums.net!
Join the discussions here on tt-forums.net!
Re: Tracks & Trains
That is a really cool idea. What are you planning to allow in these station/regions? (curves, switches, signals, crossings, etc. )smallfly wrote: Stations are more like a region. Inside this region trains can load/unload cargo.
This seems like path-dependent-routing, which is awesome!smallfly wrote: Each logistics node with more than two outgoing or incoming path starts a new block. Automatically.
I'm assuming you plan to let only one train exist in a block, which is protected by signals the player places. Do you plan to allow signals to be placed at a logistics node or between two logistics nodes, that is, along the path.
Or am I way off in trying to understand you.
Visit the Directory --> Loco-Dat-Directory
Re: Tracks & Trains
What I like is that you have fixed pieces for switches like catrain, because most railroad games don't have switches. What I liked in Sidmeiers railroads is that trains can load one waggon after another (train advances to load the next waggon).
You could take a look a lego track geometry or factorio. The signaling system and pathfinding in factorio is quite good too, maybe not trivial to program.
There was a mod in locomotion to prevent trains from turning magically the direction (CLW engine flipper), which would be better if trains could (de-) couple.
That automated decoupling is possible (if locomotives and waggons have the same length) shows a mod for factorio: https://www.youtube.com/watch?v=fQAgWssR2aY
If you could combine these elements with a more or less intelligent system for distribution of goods like industry giant 2 (or better), you would have enough elements for a good game in my opinion.
You could take a look a lego track geometry or factorio. The signaling system and pathfinding in factorio is quite good too, maybe not trivial to program.
There was a mod in locomotion to prevent trains from turning magically the direction (CLW engine flipper), which would be better if trains could (de-) couple.
That automated decoupling is possible (if locomotives and waggons have the same length) shows a mod for factorio: https://www.youtube.com/watch?v=fQAgWssR2aY
If you could combine these elements with a more or less intelligent system for distribution of goods like industry giant 2 (or better), you would have enough elements for a good game in my opinion.
Re: Tracks & Trains
There are definitely enough elements for a good game, but it's been five years since we started seeing development of this. I'm still hoping, but I am pretty unsure, if this will ever come together. What's missing for smallfly is really available time, not more ideas!robo wrote:(..)you would have enough elements for a good game
My Scenarios:
Archipiélago Hermoso (Latest Release: Version 3.2)
Turnpike Falls (Latest Release: Version 0.91)
Re: Tracks & Trains
Despite the fact that you are absolute right, there is no need to stop new ideas. Who knows, perhaps someone grabs all those ideas and makes a similiar game faster than me. I dont need to be the one who codes a game like P1SIM. I just want the game (or a very similiar one) to existChrill wrote:What's missing for smallfly is really available time, not more ideas!
www.p1sim.org - P1SIM - Traffic, Logistics, City-Building & more
Join the discussions here on tt-forums.net!
Join the discussions here on tt-forums.net!
Re: Tracks & Trains
Tossing in another idea. It's quite different to laying pre-rendered track pieces. How about track laying works like making a spline curve in a vector graphics program? That is, the player marks points and the computer produces a spline curve fitting those points. Extra points could be added afterward to re-shape the track. If a curve is too tight, it would be displayed in red and the game would refuse to finalize (build) it. The same for crossing water.
I'm not sure about the technical details, I guess you'd need a spline library for Unity, unless it has one already. How would it be drawn? Perhaps the spline library would have a feature to fit a texture to a spline (path), but that would make the rail ties tapered. O.o Perhaps ties could be drawn roughly evenly along the chosen spline curve, (no need to be too exact, but I don't know how hard even inexact calculations might be,) then the rails drawn as parallel splines. I can't quite think how to make it meet existing track smoothly. Perhaps a too-sharp angle could simply be marked in red so the player can fix it by adding a point.
I'm just making all this up, I've never played a rail game with smooth curves.
I'm not sure about the technical details, I guess you'd need a spline library for Unity, unless it has one already. How would it be drawn? Perhaps the spline library would have a feature to fit a texture to a spline (path), but that would make the rail ties tapered. O.o Perhaps ties could be drawn roughly evenly along the chosen spline curve, (no need to be too exact, but I don't know how hard even inexact calculations might be,) then the rails drawn as parallel splines. I can't quite think how to make it meet existing track smoothly. Perhaps a too-sharp angle could simply be marked in red so the player can fix it by adding a point.
I'm just making all this up, I've never played a rail game with smooth curves.
Extreme network builder. screenshot thread
Who is online
Users browsing this forum: No registered users and 2 guests